What To Do If Your Water Heater Unexpectedly Stops Working

View More

Were you on the lookout for critical information about What Would Cause My Electric Water Heater to Stop Working??


What Would Cause My Electric Water Heater to Stop Working?
Many modern-day homes take advantage of an electric hot water heater for their heater, as a result of its benefit and also simplicity of use. However, much like any other electrical home appliances, problems might arise with its use, unexpectedly. It can be truly frustrating to get up to a cool shower rather than a warm one or having your bathroom with water that isn't hot adequate and even too hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Fortunately, we have actually made a list of feasible solutions to your hot water heater issues. There are a variety of elements that can create a number of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it dealt with ought to not posture too much of a concern if you follow these actions:

Call A Specialist:


If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might need to get in touch with a specialist plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a professional plumber would aid solve the problem.

Check Your Power Supply:


As fundamental as this might appear, it is really necessary. Without sufficient power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any kind of busted or damaged fuse. Examine the device with power after these adjustments to see if it's currently functioning.

Examine Your Thermostat:


If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make certain the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the problem has been resolved.

Examine the Burner in the Hot Water Heater:


If it's not a power trouble, after that try having a look at your heating element if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any of them is faulty, change that component and after that inspect whether the hot water is back on.

Conclusion


Hot water heater troubles are not always major. Many of them result from small problems like a blown fuse or worn-out burner. Changing the malfunctioning parts should suffice. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it fixed.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


Hot Water Heater Repair

We had been made aware of that editorial about What Would Cause My Electric Water Heater to Stop Working? through a friend on another website. So long as you enjoyed our article please be sure to pass it around. Many thanks for your time spent reading it.




Get An Estimate

Leave a Reply

Your email address will not be published. Required fields are marked *